This article is more than 5 years old. Information may no longer be current.
Knotless pull-through technique creates efficiency for labral hip reconstruction
Click Here to Manage Email Alerts
The hip labrum is important for joint stability and kinematics and has nerve endings facilitating proprioception and pain. Treating the damaged labrum is essential due to the established correlation between labral damage and the development of osteoarthritis. Labral repair has yielded superior outcomes to debridement, and therefore, it is the first-line approach to repair the labrum. However, in certain cases the labrum may be irreparable, due to extensive tearing, calcification of its substance or previous labral insufficiency after previous surgery. In these cases, labral reconstruction may offer a means of restoring the anatomy and function of the native labrum.
While labral reconstruction is a relatively new technique, it has emerged as an established treatment for irreparable labral tears in the hip. Furthermore, literature has shown labral reconstruction to have better outcomes than debridement in the case of an irreparable labrum. Our previously published technique involves measuring the labral defect with a suture or an arthroscopic measuring tool. This technique requires precise defect measurement, accurate graft preparation and anchor placement after introduction of the graft. Each of these steps can present pitfalls.
This Surgical Technique presents a modified technique for labral reconstruction — the knotless pull-through technique. This technique takes advantage of newer knotless anchor technology, which allows for placement of all anchors prior to introduction of the graft and eliminates potential graft size errors. The aims of this technique are to create a reproducible and efficient procedure for labral reconstruction, which accurately restores native labral anatomy and function.
After resection of the native labrum and decortication of the acetabular rim, four knotless sutures are placed 6 mm to 8 mm from one another on the acetabular rim.
Once the graft is introduced into the joint through the DLAP portal, the anterior part of the graft is anchored to the rim adjacent to the native labrum.
Images: Domb B
Surgical technique
The patient is placed in the modified supine position in slight Trendelenburg position on a traction table with a well-padded perineal post. A spinal needle is inserted into the joint for ventilation. Traction is applied to the nonoperative leg before application, as needed up to 50 lbs, on the operative leg. Anterolateral, mid-anterior, posterolateral and distal lateral accessory portals (DLAP) are used to access the hip joint throughout the procedure. A thorough diagnostic arthroscopy is performed to assess the ligamentum teres, labrum, cartilage and bony morphology. This assessment is integral for intraoperative decision-making process.
An irreparable labrum in an appropriate patient would indicate labral reconstruction. Once confirmed, labral reconstruction is indicated, the remaining labrum is debrided and the acetabular rim is decorticated. Knotless SutureTak anchors (Arthrex) are placed on the acetabular rim with approximately 6 mm to 8 mm of spacing (Figure 1). A drill hole is created in the most anterior aspect of the segmental labral defect, which will be used to introduce a PushLock anchor (Arthrex) attached to the graft. The graft is prepared using a double-stranded semitendinosus allograft, with locked permanent sutures in each end, resulting in a minimum graft length of 12 cm. Absorbable sutures are placed every 2 cm in order to maintain graft shape and integrity.
The graft is introduced into the joint through the DLAP portal with the back end first. The sutures from the back end of the graft are then retrieved through the posterolateral portal, and the graft is pulled through the joint. The front end of the graft is the last to enter the joint through the DLAP portal, which is guided with the PushLock anchored to the anterior aspect. The Pushlock is then placed in the pre-drilled hole, anchoring the anterior end of the graft to the most anterior part of the segmental labral defect (Figure 2).
The graft is secured to the acetabular rim using the pre-placed Knotless SutureTak anchors. Mild tension is maintained on the graft while the sutures from each of the Knotless SutureTak anchors are sequentially passed around the graft and shuttled through the internal mechanism (Figure 3). The sutures are then tightened to the tension needed for the graft to securely attach to the acetabular rim, using the one-way catch mechanism (Figure 4).
Following completion of the reconstruction, the end of the graft is amputated to the appropriate length using electrocautery (Figure 5). After amputation, the excess graft is pulled out of the joint through the posterolateral portal using the locked suture, which was stitched in the back end of the graft. This yields a graft exactly fit for the segmental defect (Figure 6). Once traction is released, the suction seal between the femoral head and the graft is evaluated (Figure 7).
Pearls and pitfalls
The recommendation is to use a double-stranded semitendinosus graft and place absorbable sutures every 2 cm along the graft to maintain integrity and avoid separation of the strands and use a suture attached to the posterior part of the graft to pull the graft through the joint with the back end first and out the posterolateral portal. To prevent graft malpositioning, the recommendation is to apply mild tension to the graft with the suture, while securing the graft to the decorticated acetabular rim using the Knotless SutureTak anchors.
The labral reconstruction is completed, which fills the area of segmental labral loss.
The suction seal is evaluated after the graft is secured along the rim.
Knotless labral reconstruction using a pull-through technique takes advantage of newer knotless suture anchor technology and allows for placement of all anchors prior to introduction of the graft into the joint. This can minimize surgical time and reduce potential suture management challenges. Furthermore, pulling the graft through the joint with the back end first and out the posterolateral portal allows the graft to be tensioned throughout the steps of suture anchor fixation. Amputation of the graft after completion of fixation ensures complete fill of the area of segmental labral defect.
The main limitation to this technique is its technical complexity. Attention to suture management is required throughout, and care should be taken to avoid over-tensioning of the anchors, which can over-evert the labral graft, disrupting its seal against the femoral head.
Labral reconstruction in the hip is a relatively novel technique that was established over the last decade. Consequently, medium- and long-term data analysis is still needed. Nevertheless, as short-term results have shown labral reconstruction to be beneficial for patients with irreparable labral tears, refinement of labral reconstruction technique is paramount. The technique presented offers an efficient and reproducible method for labral reconstruction, which will minimize surgical time, provide consistent fill of the area of segmental labral loss and reproducibly restore the anatomy and functional suction seal of the labrum.
- References:
- Alzaharani A, et al. BMC Musculoskelet Disord. 2014;doi:10.1186/1471-2474-15-41.
- Benali Y, et al. Arthroscopy. 2009;doi:10.1016/j.arthro.2009.01.012.
- Domb BG, et al. Am J Sports Med. 2014;doi:10.1177/0363546513508256.
- Geyer MR, et al. Am J Sports Med. 2013;doi:10.1177/0363546513487311.
- Matsuda DK, et al. Am J Sports Med. 2013;doi:10.1177/0363546513482884.
- Philippon MJ, et al. Arthroscopy. 2010;doi:10.1016/j.arthro.2009.10.016.
- Philippon MJ, et al. J Bone Joint Surg Br. 2009;doi:10.1302/0301-620X.91B1.21329.
- White BJ, et al. Arthroscopy. 2016;doi:10.1016/j.arthro.2015.07.016.
- For more information:
- Benjamin G. Domb, MD; and Itay Perets, MD, can be reached at Hinsdale Orthopaedics Associates, 1010 Executive Ct., Suite 250, Westmont, IL 60559; Domb’s email: bendomb@gmail.com; Perets email: itay.perets@gmail.com.
Disclosures: Domb reports is a paid consultant and presenter or speaker and receives IP royalties and research support from Arthrex. Perets reports no relevant financial disclosures.